Model Number

A186G

1. Energy-saving clutch fixed on shaft of the main motor,using v-belt to drive cylinder and then be driven by taker-in ,simple and reliable structure, start steadily . In order to suit the starting and stopping of doffer,preventing block-up of card,a taker-in speed sensor is fixed to control the speed,
2. It is convenient to operate,sensitive and reliable to control,for the doffer motor adopts AC stepless frequency, controls piecing-up with low speed and run rapidly.Synchronous tooth belt makes it run steadily with low noise.
3. The feed roller is dirven by a separate motor ,AC stepless speed invertor is interlocked with doffer.
4.Using three-roller cotton strippings.An actively transmited cleaning roller is fitted on the stripping roller,to prevent the doffer clothing from being damaged.,a movable curl plate condenser between the squeeze roll and calender roller is fixed to improve its working stability

5. The filter box which is mounted on the left side of frame is used for continuously absorbing the wast and the waste is stored into filter box by continuous suction,and then extracted by the outside suction system.
6. The special workframe with high intensity,is easily adjustable and convenient for dismounting of Cylinder screen.
7. Suitable for laps or hopper feeding.
8. Front and rear stationary flats and taker-in segment plate are fitted .
9. Optimum designed constructions of the Cylinder and doffr ensure its precision and stiffness.
10. Convenient totally-encloseed safety covers.
11. There are four automatic stop motion devices .
12. 0.56mm.small hel-toe of flat improves the combing efficiency.