Model Number

A186K

This machine is used for processing cotton and man-made fibre or blends in length 22-76mm
Output:up to 45kg/h(max)
Sliver count:3.5-6.5g
Layer weight:400-800g/m
Working width:1000m
Total draft:68.7-152.8
Taker-in diameter:250mm
Taker-in speed:823,938,1039rpm
Doffer diameter:706mm
Doffer speed:4-46rpm
Cylinder diameter:1289mm
Cylinder speed:323,360,403r/min
No.of recolving flats(working/total):39/104
Auxiliary carding parts:Taker-in carding segment,front 3rear 2stationary flats of front 4 rear 2
Stationary flats with 1web purifier.
Can size(mm):600*900,600*1100
Total installed power:5.72kw
The main motor:3.3kw
Dofer motor:1.5kw
Motor for cleaning roller:0.37kw
Motor for feeding roller:0.55kw
Floor area(L*W)3721*2033(mm)
Net weight:approx,5500kg

Blowing-carding-drawing unit:
Without cotton wasres,suitable for high speed and high production
Continuous suction:air exhaust amount 2800-3500m3/h for continuous suction.
1. Energy-saving clutch fixed on shaft of the main motor,using v-belt to drive cylinder and then the taker-in driven,this structure is simple and reliable and smooth o start.A taker-in speed sensor is fixed to control is speed to suit the starting and stopping of doffer,which prevents block-up of card.
2. The doffer motor adopts AC stepless frequency control piecing-up with low speed and running rapidly,it is convenient to operate,sensitive and reliable to control.Synchronous tooth belt make it run steadily with low niose.
3. The feed roller is dirven by a separate motor ,AC stepless speed invertor is interlocked with doffer4. Three-roller cotton strippings,on the stripping roller,an actively transmited cleaning roller is fitted to prevent the doffer clothing from being damaged.Between the squeeze roll and calender roller,a movable curl plate condenser is fixed to improve its working stability.
5. The filter box is mounted on the left side of frame.The waste is stored into filter box by continuous suction,and then extracted by the outside suction system.
6. The special workframe with high intensity,easily adjustable and convenient for dismounting of Cylinder screen.
7. Suitable for laps or chute feeding
8. Front and rear stationary flats and taker-in segment plate are fitted .

9. Optimum designed constructions of the Cylinder and doffr ensure its precision and stiffness.
10. Convenient totally-encloseed safety covers.
11. There are four automatic stop motion devices .
12. Small hel-toe of flat is 0.56mm.combing efficiency is improved.