Model Number

FA209

、Three parents obtained:three stripper rollers device , main driving system and filter chanber used for single-card
2、Stepless variabe drive of doffer controlled by an inverter(an electronic frequency converter)
3、New type of three front stationary flats and three post ones
4、One set of carding segment installed under licker-in
5、New model and high quality metallic card clothing
6、Digital display unit and contactless sensor showing technical
　 parameters such as delivery speed , shift production ,
　 ect.......,And iseveral automatic stop motion device
7、Continuous suction of four points of overcard and intermittent suction of system
Specifications
1、 Applications : processing cotton and man-made fibres or blends in length of 22-76
2、 Sliver count(g/m):3.5-6.5
3 、Lap size(mm):max diameter 550 width 980
4、 Cotton layer weight by chute feed (g/m):450-1000 5、 Production rate (kg/h):up to 40
6 、Total draft :67.5-120.5
7 、Licker-in speed(r/mm): 930 800
8 、Doffer speed(r/mm): 6-36
9 、Cylinder apeed(r/mm): 360 330

10 、No.Of revolving flats (working/total): 41/106
11 、Flats speed(mm/min): 72 91 129 141 184 241 342
12 、Carding segment under licker-in: 1 piece
　 　Post stationary flat: 3 pieces
　 　Front stationary flat: 3 pieces
13、 Can size (mm) diameter: 600
　　 Height: 900 1100
14 、Suction system : The filter chamber of single-card is used at four overcard suction points to extract
　　 continuously (static pressure on air outlet is required to be -49到-98pa).Air outlet: 1800m3/h
　　　The undercard waste and fly and dust on the filter net of chamber are extracted intermittently by suction
　　 system of outside card(the air volume on air inlet of each card is required to be 2000m3/h, static pressure
　　 to be-1863pa).
　　 The suction system of outside card is supplied by userself(if required, we can specially design the suction
　　 system for user and suddly it with card).
15 、Total installed power:5.17kw.
16 、Space requirement(length×width): 3523×2096mm
17 、Net weigth(kg):approx:4500